2024 Degelman Strawmaster 7000 Series 5 Bar SM50

2024 Degelman Strawmaster 7000 Series 5 Bar SM50

Swipe to View More

  • Year 2024
  • Make Degelman
  • Model Strawmaster 7000 Series 5 Bar
2024 Degelman Strawmaster 7000 Series 5 Bar SM50

2024 Degelman Strawmaster 7000 Series 5 Bar SM50

2024 Degelman Strawmaster 7000 Series 5 Bar SM50

The Degelman Strawmaster is engineered tough and designed to tackle enormous straw problems. Available in 5 row; 26” x 5/8” tines or 7 row; 26" x 1/2" tines equipped with tungsten carbide Endura-Tip tines, and set in large ten foot wide sections, this machine is at the forefront of modern straw management. The Strawmaster series of heavy harrows will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.

KEEP IT SIMPLE MINIMAL PARTS - MINIMAL MAINTENANCE

The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.

Easy, Drop-Out Tine Replacement

The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.

Fast, Simple Adjustments

From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.

Ground Contouring

Under float or under pressure, the harrow sections are designed for flexibility. The torsion spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The bars can then flex in response to counter pressure from the land contours with each section rising over hills and falling into hollows.

Patented Torsion Technology

Simply rotate the 8” x 8” beam hydraulically and apply more pressure through the spring bars. Strawmaster works the way you want it to.

Breaking and Spreading Straw

The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 12 mph can be attained.

Raking

The Strawmaster is quickly becoming the most popular machine for raking flax straw. It can maximize holding capacity by applying pressure through the spring bar control.

7 rows offers 68% More Ground Engagement

The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting.

Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw.

The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of ½” x 26” tines with 1-7/16” spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.

Engine

Minimum Engine Power 150 hp
Engine Power (ideal): 200 hp

Wheels & Tires

Tires, Rear Specification 11 L x 15 Highway | Tires - Main Cart: 16.5L x 16.1

Chassis

Frame Type Trailer: 4” x 8” x 1/4” | Tine Section Frame: 2” x 4” x 3/16”

Dimensions

Width 50’
Transport Length 42'
Transport Width 14’ - 7”
Transport Height 10’ - 6”
Dimensions Wing Beam: 8” X 8” X 1/4” | Hydraulics - Auto-Fold: 3-1/2” x 31” x 2” Rod | Tine Size: 5/8” x 26” Standard, Carbide Endura-Tip | Tine Spacing: 18” Centers

Weights

Weight 11,360 lbs
Dry Weight, Hitch -300 lbs (upwards)

Features

Features Harrow sections: 5 | Rows of tines: 5 | Tine Replacement: Easy Drop-Out Tine Bar

Product Photography